UNS N06022 Sheets, Buy Large Or Small Quantity Hastelloy C22 Sheet, C22 Hastelloy Alloy Plates, Hastelloy C22 Shim Sheets, Hastelloy N06022 Plates, C22 Hastelloy Perforated Sheet Supplier in Mumbai, India.
Hastelloy Alloy C22 Chequered Plate, Hastelloy C22 Strip, Alloy C22 Coils, Werkstoff Nr. 2.4602 Sheets, ASTM B575 Hastelloy C22 Hot Rolled Plate Manufacturer, JIS NW 6022 Plate, Hastelloy 2.4602 Cold Rolled Plates, C22 Hastelloy Alloy Foils Manufacturer in India.
Jade Special Metals is an identified exporter of Hastelloy Alloy C22 Sheets and Plates, which is quite tough to machine due to the extremely high work hardening rate and lack of sulfur content. However, using sharp tools, overpowered machine tools, positive feeds, good amount of lubrication, and slow speeds for Hastelloy C22 Plates tend to provide good machining results. In new construction, Hastelloy C22 Coils has been found in many cases to be a technically adequate and much less costly substitute for nickel based alloys and titanium. The high levels of molybdenum in particular but also of chromium and nitrogen endow Hastelloy C22 Perforated Sheets with extremely good resistance to pitting and crevice corrosion. The soaring levels of molybdenum especially but as well of nitrogen and chromium provide these Hastelloy C22 Perforated Plates by means of exceptionally resistance to crevice and pitting corrosion. In new-fangled construction, these Hastelloy C22 Perforated Coils has been found in a lot of cases to be a strictly passable and much less overpriced standby for titanium and nickel based alloys. Hastelloy C22 Slatting Sheets is quite rough to machine because of the very high work habituation rate and nonexistence of sulfur content. A tremendously elevated work toughening rate joined by means of a complete absence of sulfur make these Hastelloy C22 Slatting Plates extremely rough to machine.
Quick Section Links
- Hastelloy C22 Sheets & Plates Specifications
- Hastelloy C22 Sheets & Plates Equivalent Standard Grade
- Hastelloy C22 Sheets & Plates Inventory
- Hastelloy C22 Sheets & Plates Chemical Composition
- Hastelloy C22 Sheets & Plates Mechanical Properties
- Available Stock of ASTM B575 Hastelloy C22 Sheets & Plates
- Applications of Hastelloy C22 Sheets & Plates
Hastelloy C22 Sheets & Plates Specifications
| Standard : | ASTM B575 / ASME SB575 |
| Width : | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Thickness : | 0.3 mm to 120 mm |
| Length : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Form : | Sheets, Plates, Coils, Slatting Coils, Perforated Coils |
| Finish : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
“Contact Jade Special Metals today with your requirement for Hastelloy C22 Sheet and Alloy C22 Plates. We assure you of the best quote.
Hastelloy C22 Sheets & Plates Equivalent Standard Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN | GOST | OR |
| Hastelloy C22 | 2.4602 | N06022 | NW 6022 | NiCr21Mo14W | – | – |
Hastelloy C22 Sheets & Plates Inventory
Hastelloy C22 Perforated Sheets
Hastelloy C22 Chequred Plates
Hastelloy C22 Shim Sheets
Hastelloy C22 Coils
Hastelloy C22 Foils
Hastelloy C22 Strips
Hastelloy C22 Sheets & Plates Chemical Composition
| Grade | C | Mn | Si | S | Co | Ni | Cr | Fe | Mo | P |
| Hastelloy C22 | 0.010 max | 0.50 max | 0.08 max | 0.02 max | 2.50 max | 50.015 min* | 20.00 – 22.50 | 2.00 – 6.00 | 12.50 – 14.50 | 0.02 max |
Hastelloy C22 Sheets & Plates Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Hastelloy C22 | 8.69 g/cm3 | 1399 °C (2550 °F) | Psi – 1,00,000 , MPa – 690 | Psi – 45000 , MPa – 310 | 45 % |
Hastelloy C22 Sheets & Plates Sizes
| Hastelloy C22 0.4mm (0.01575”) Thick Sheet | Hastelloy C22 0.5mm (0.01969”) Thick Sheet | Hastelloy C22 0.7mm (0.02756”) Thick Sheet | Hastelloy C22 0.8mm (0.0315”) Thick Sheet | Hastelloy C22 1.0mm (0.03937”) Thick Sheet | Hastelloy C22 1.2mm (0.04724”) Thick Sheet | Hastelloy C22 1.6mm (0.06299”) Thick Sheet |
| Hastelloy C22 2.0mm (0.07874”) Thick Sheet | Hastelloy C22 3.0mm (0.1181”) Thick Sheet | Hastelloy C22 4.0mm (0.1575”) Thick Sheet | Hastelloy C22 5.0mm (0.1969”) Thick Sheet | Hastelloy C22 6.0mm (0.2362”) Thick Sheet | Hastelloy C22 8.0mm (0.315”) Thick Sheet | Hastelloy C22 10.0mm (0.3937”) Thick Sheet |
Available Stock of ASTM B575 Hastelloy C22 Sheets & Plates
- Hastelloy C22 Shim Sheets
- Alloy C22 Circles
- C22 Hastelloy Plain Sheets
- C22 Hastelloy Alloy Foils
- UNS N06022 Polished Plates
- WERKSTOFF NR. 2.4602 Perforated Sheet
- ASTM B575 C22 Hastelloy Sheet
- Hastelloy C22 Sheet Cut To Size
- Hastelloy C22 Sheet #4 Finish
- Alloy C22 Cold Rolled Plates
- ASTM B575 Type C22 Plate 2B Finish
- C22 Hastelloy Plate Mill Finish
- UNS N06022 Plates
- WERKSTOFF NR. 2.4602 Shim Sheets
- ASTM B575 Alloy C22 Coils
- ASTM B575 Alloy C22 Slitting Coil
- Hastelloy C22 CR Sheet
- Hastelloy Alloy C22 Strips
- C22 Hastelloy #4 Finish Sheets
- C22 Hastelloy Alloy Foils
- UNS N06022 Sheet Supplier
- WERKSTOFF NR. 2.4602 HR Plates
- C22 Hastelloy Sheet
- Alloy C22 #8 Finish Plates
- Hastelloy® Alloy C22 Plate Manufacturer
- C22 Hastelloy Laser Cutting Sheet
- Hastelloy C22 Sheets
- C22 Hastelloy Sheets Distributor
- UNS N06022 Plates Exporter
- WERKSTOFF NR. 2.4602 CR Sheets
- ASTM B575 Type C22 Sheet and Plate
- ASTM B575 C22 Hastelloy Plate
- 2.4602 Hastelloy Perforated Sheet
- Alloy C22 2B Finish Plates Stockist
- Hastelloy® Alloy C22 Sheets
- Hastelloy C22 Sheets Price
Applications of Hastelloy C22 Sheets & Plates
- Pipeline Engineering
- Marine Industry
- Chemical Industry
- Oil & gas industry
- Mechanical Engineering
- Plant Engineering
- Petrochemical Industry
- Power Industry
- Aerospace
- Food Processing Industry
We maintain ready stock of C22 Hastelloy Sheet, Alloy C22 Plates, Hastelloy C22 Coils, Hastelloy Alloy C22 Shims, Hastelloy C22 Strips and C22 Hastelloy Foils. Get in touch with us with your requirement for quick quote.