Inconel Round Bars, Inconel Rods & Inconel Bar Stock Suppliers in India
Jade Alloys is a trusted manufacturer, exporter and supplier of Inconel round bars in India, serving aerospace, power, oil & gas and chemical processing plants worldwide from our Mumbai facility. We stock Inconel bar stock in nickel-chromium and nickel-iron-chromium superalloy grades including Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 718, Inconel X-750, Incoloy 800/800H/800HT and Incoloy 825.
An Inconel round bar is a solid cylindrical section produced by hot rolling, forging, cold drawing or centreless grinding from a nickel-base superalloy. What sets these bars apart is their behaviour under heat: as temperature rises, the alloy forms a thick, stable, passivating chromium-oxide layer that seals the surface against further oxidation and chemical attack. That single property is why an Inconel bar holds usable strength at 1000 °C where stainless steel has long since crept or scaled away. If you are new to the material, our guide on what Inconel is — composition and properties explains the metallurgy in plain terms.
We supply Inconel rod and bar in diameters from 3 mm to 600 mm, lengths from 0.5 m to 6 m (custom cuts available), in annealed (ANN), hardened & tempered (H&T) and precipitation hardened (PH) conditions with EN 10204 3.1 mill test certificates, PMI reports and third-party inspection on every consignment. As established Inconel round bar suppliers, we ship ex-stock from Mumbai and hold material of European, American, Japanese, Korean and Indian origin.
Why Choose Inconel Round Bars?
- High-temperature strength: Retains mechanical properties up to 2000 °F (1093 °C), far beyond stainless or alloy steel round bars.
- Oxidation & corrosion resistance: The self-healing oxide film resists scaling, carburisation and chloride-ion stress corrosion cracking.
- Creep-rupture performance: Critical for jet engine shafts, turbine bolting and reactor internals.
- Weldability & machinability: Weldable by GTAW, GMAW, SMAW, laser and electron beam; machinable with rigid tooling and slow feeds.
- Versatility of form: Available as round, hex, square, flat, hollow, bright, forged and threaded bar.
- Service life: Lower lifetime cost than repeatedly replacing cheaper material in a corrosive, high-heat service.
Inconel Round Bar Grades We Supply
We supply a comprehensive range of specialized high-nickel grades
Also supplied on order: Inconel 690, 751, 792, 903 and 939.
Inconel Round Bar Specification
| Category | Details |
|---|---|
| Diameter | 3 mm – 600 mm (¼” to 24″) |
| Length | 0.5 m – 6 m and above; custom cut-to-length |
| Size range (NB) | 15 NB to 150 NB |
| Standards | ASTM B166 / ASME SB 166, ASTM B446 / ASME SB 446, ASTM B637 / ASME SB 637, ASTM B408 / ASME SB 408, ASTM A276, A479, A484, A582, DIN, EN, JIS, GB, AISI, API |
| Supply condition | ANN (Annealed), H&T (Hardened & Tempered), PH (Precipitation Hardened) |
| Tolerance | H8, H9, H10, H11, H12, H13 / K9, K10, K11, K12 — or to drawing |
| Manufacturing method | Hot rolled, forged, cold drawn, extruded, peeled, centreless ground |
| Origin | European, American, Japanese, Korean, Russian, Indian |
| Testing | Tensile, hardness, impact, bend, PMI, eddy current, radiographic, pitting corrosion, ferritescope, X-ray |
| Documentation | EN 10204 3.1 / 3.1B MTC, PMI report, third-party inspection, raw material certificate, 100% radiography report, visual inspection report |
| Value-added services | Cutting, shearing, heat treatment, machining, marking, polishing |
| Marking | Material grade, heat number, nominal size, method of manufacture |
| Packaging | Bubble wrap, wooden boxes, custom seaworthy packing |
| HSN Code | 75051220 (Inconel 600 / 718), 72288090 (Inconel 625) |
Section sizes across forms
| Form | Size Range |
|---|---|
| Inconel Round Bar | Ø 3 mm – 600 mm |
| Inconel Hex Bar | A/F 3 mm – 180 mm |
| Inconel Square Bar | 2 mm × 2 mm – 200 mm × 200 mm |
| Inconel Flat Bar | Thickness 0.5–200 mm × Width 1.5–250 mm |
| Inconel Angle Bar | 3×20×20 mm – 12×100×100 mm |
| Inconel Hollow Bar | Custom OD/ID, thicker wall than pipe |
Chemical Composition of Inconel Round Bar
| Grade | Ni | Cr | Fe | Mo | Nb+Ta | C | Mn | Si | S | Cu | Al | Ti | Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inconel 600 | 72.0 min | 14.0–17.0 | 6.0–10.0 | – | – | 0.15 max | 1.0 max | 0.5 max | 0.015 max | 0.5 max | – | – | – |
| Inconel 601 | 58.0–63.0 | 21.0–25.0 | Balance | – | – | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | 1.0–1.7 | – | – |
| Inconel 625 | 58.0 min | 20.0–23.0 | 5.0 max | 8.0–10.0 | 3.15–4.15 | 0.10 max | 0.5 max | 0.5 max | 0.015 max | – | 0.40 max | 0.40 max | 1.0 max |
| Inconel 718 | 50.0–55.0 | 17.0–21.0 | Balance | 2.8–3.3 | 4.75–5.5 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.3 max | 0.2–0.8 | 0.65–1.15 | 1.0 max |
Mechanical & Physical Properties of Inconel Rod
| Property | Inconel 600 | Inconel 601 | Inconel 625 | Inconel 718 |
|---|---|---|---|---|
| Density | 8.47 g/cm³ | 8.1 g/cm³ | 8.44 g/cm³ | 8.2 g/cm³ |
| Melting range | 1354–1413 °C | 1320–1370 °C | 1290–1350 °C | 1260–1336 °C |
| Tensile strength | 655 MPa (95,000 psi) | 550 MPa (80,000 psi) | 930 MPa (135,000 psi) | 930 MPa (135,000 psi) |
| 0.2% yield strength | 310 MPa (45,000 psi) | 205 MPa (30,000 psi) | 517 MPa (75,000 psi) | 483 MPa (70,000 psi) |
| Elongation | 40% | 35% | 42.5% | 45% |
| Brinell hardness | ≤195 HB | ≤220 HB | ≤220 HB | ≤363 HB |
| Max service temp | 1093 °C / 2000 °F | 1150 °C | 980 °C | 700 °C |
Equivalent Grades of Inconel Bars
| Standard | UNS | Werkstoff Nr. | GOST | BS | JIS | EN | AFNOR |
|---|---|---|---|---|---|---|---|
| Inconel 600 | N06600 | 2.4816 | ЭИ868 | NA 13 | NCF 600 | NiCr15Fe | NC15FE11M |
| Inconel 625 | N06625 | 2.4856 | ЭИ602 | NA 21 | NCF 625 | NiCr22Mo9Nb | NC22DNB4M |
| Inconel 718 | N07718 | 2.4668 | – | – | – | – | – |
| Incoloy 800 | N08800 | 1.4876 | ЭИ670 | NA 15 | NCF 800 | X10NiCrAlTi32-20 | Z8NC32-21 |
| Incoloy 825 | N08825 | 2.4858 | ЭП703 | NA 16 | NCF 825 | NiCr21Mo | NFE30C20DUM |
Types of Inconel Bar We Manufacture
Inconel Round Bar · Inconel Hex Bar · Inconel Square Bar · Inconel Flat Bar · Inconel Rectangular Bar · Inconel Hollow Bar · Inconel Bright Bar · Inconel Cold Drawn Bar · Inconel Forged Bar · Inconel Hot Rolled Bar · Inconel Annealed Bar · Inconel Polished Bar · Inconel Peeled & Turned Bar · Inconel Threaded Bar / Threaded Rod · Inconel PSQ Bar (Pump Shaft Quality) · Inconel Round Corner Square Bar · Inconel Half Round Bar · Inconel Triangle Bar · Inconel Angle Bar · Inconel Billet / Bloom / Ingot · Inconel Shaft · Inconel Welding Rod · Inconel Filler Rod · Inconel Wire & Wire Rod
Inconel Bar Finishes
| Code | Finish | Code | Finish |
|---|---|---|---|
| P&T | Peeled and turned | RT | Rough turned / peeled |
| BD | Bright drawn | SRE | Slit rolled edge |
| CG | Centreless ground | HF | Hot finished |
| CD | Cold drawn | P | Polished |
| ST | Smooth turned | PR | Peeled and reeled |
| CF | Cold finished | HRAP | Hot rolled, annealed & pickled |
Also available: 240-grit belt polished, No. 4 finish, BA finish, matt finish, black, pickled, shot blast & drawn.
Inconel Cold Drawn Bar Tolerances
| Shape | Width Across Flats (mm) | Permitted Variation (mm) |
|---|---|---|
| Round | ≥6 ≤18 | +0 / −0.070 |
| >18 ≤30 | +0 / −0.085 | |
| >30 ≤50 | +0 / −0.100 | |
| >50 ≤80 | +0 / −0.120 | |
| >80 ≤100 | +0 / −0.140 | |
| Square & Hexagon | ≥6 ≤18 | +0 / −0.090 |
| >18 ≤30 | +0 / −0.110 | |
| >30 ≤50 | +0 / −0.130 | |
| >50 ≤80 | +0 / −0.160 | |
| >80 ≤105 | +0 / −0.250 | |
| Flat (width) | <18 | +0 / −0.110 |
| >30 ≤50 | +0 / −0.160 | |
| >100 ≤130 | +0 / −0.350 | |
| >160 ≤320 | +1.00 / −1.00 |
Inconel Round Bar Size Chart
| US Bar Size | Diameter (inch) | Metric Bar Size | Diameter (mm) | ASTM (Canadian) | Area (mm²) |
|---|---|---|---|---|---|
| #2 | 0.250 | 6 | 6 | 10M | 100 |
| #3 | 0.375 | 10 | 10 | 15M | 200 |
| #4 | 0.500 | 13 | 13 | 20M | 300 |
| #5 | 0.625 | 16 | 16 | 25M | 500 |
| #6 | 0.750 | 19 | 19 | 30M | 700 |
| #7 | 0.875 | 22 | 22 | 35M | 1000 |
| #8 | 1.000 | 25 | 25 | 45M | 1500 |
| #9 | 1.125 | 29 | 29 | 55M | 2500 |
| #10 | 1.250 | 32 | 32 | – | – |
| #11 | 1.375 | 35 | 35 | – | – |
| #12 | 1.500 | 38 | 38 | – | – |
| #13 | 1.625 | 41 | 41 | – | – |
| #14 | 1.750 | 44 | 44 | – | – |
| #15 | 1.875 | 48 | 48 | – | – |
| #16 | 2.000 | 51 | 51 | – | – |
| #18 | 2.250 | 57 | 57 | – | – |
Inconel Round Bar Weight Chart
While both are high-performance nickel alloys, they are engineered for different extremes. Inconel is primarily designed for high-heat environments, whereas Monel is the go-to for superior corrosion resistance in marine and chemical settings.
| Size | kg/Foot | kg/Metre | Size | kg/Foot | kg/Metre |
|---|---|---|---|---|---|
| 3 mm | 0.017 | 0.055 | 1″ | 1.210 | 3.970 |
| 5 mm | 0.047 | 0.154 | 1-1/8″ | 1.534 | 5.033 |
| 6 mm | 0.068 | 0.223 | 1-1/4″ | 1.924 | 6.349 |
| 8 mm | 0.120 | 0.398 | 1-3/8″ | 2.303 | 7.550 |
| 10 mm | 0.189 | 0.620 | 1-1/2″ | 2.715 | 8.951 |
| 12 mm | 0.271 | 0.889 | 1-5/8″ | 3.200 | 10.449 |
| 16 mm | 0.481 | 1.578 | 1-3/4″ | 3.712 | 12.179 |
| 20 mm | 0.753 | 2.470 | 2″ | 4.848 | 15.906 |
| 25 mm | 1.180 | 3.871 | 2-1/4″ | 6.135 | 20.128 |
| 30 mm | 1.691 | 5.548 | 3″ | 10.900 | 35.762 |
| 40 mm | 3.009 | 9.872 | 4″ | 19.306 | 63.340 |
| 50 mm | 4.698 | 15.414 | 5″ | 30.461 | 99.940 |
| 60 mm | 6.768 | 22.205 | 6″ | 43.860 | 143.900 |
Inconel Round Bar Weight Calculation Formula
Weight (kg/m) = OD² (mm) × 0.00617 — for carbon-equivalent estimation Weight (kg/m) = 0.0007854 × OD × OD × Density (g/cm³) — for accurate Inconel weight (use 8.47 for Inconel 600)
Need a fast calculation? Use our Metal Weight Calculator.
Inconel Hex Bar Weight Chart
| Size (A/F) | Wt per Foot (lb) | Wt per 12 ft (lb) |
|---|---|---|
| 1/4″ | 0.180 | 2.16 |
| 3/8″ | 0.625 | 4.92 |
| 1/2″ | 0.740 | 8.88 |
| 5/8″ | 1.150 | 13.80 |
| 3/4″ | 1.660 | 19.92 |
| 7/8″ | 2.300 | 27.60 |
| 1″ | 2.900 | 34.80 |
| 1-1/4″ | 4.625 | 55.20 |
| 1-1/2″ | 6.625 | 79.20 |
| 1-3/4″ | 9.030 | 108.36 |
| 2″ | 11.800 | 141.60 |
| 2-1/2″ | 18.420 | 221.04 |
| 3″ | 26.530 | 318.36 |
Inconel Flat Bar Sizes
| Flat Size (mm) | Colour Code | kg/m | Standard Length |
|---|---|---|---|
| 10 × 3 | Blue | 0.24 | 6 m |
| 16 × 5 | Orange | 0.64 | 6 m |
| 20 × 6 | White | 0.97 | 6 m |
| 20 × 10 | Yellow | 1.61 | 6 m |
| 25 × 8 | Red | 1.61 | 6 m |
| 25 × 12 | Pink | 2.41 | 6 m |
| 32 × 10 | Yellow | 2.58 | 6 m |
| 40 × 5 | Orange | 1.61 | 6 m |
Inconel Bar Heat Treatment
| Solution Annealing | Precipitation Hardening (Age Hardening) |
|---|---|
| Heat to 925–980 °C, then quench | Hold at 720 °C for 8 hours |
| Rapid cool to ambient | Furnace cool at ~50 °C/hr to 620 °C |
| Restores ductility, dissolves carbides | Hold 18 hours, air cool — develops γ″/γ′ strengthening |
Applies primarily to age-hardenable grades such as Inconel 718 and X-750.
Welding Techniques for Inconel Bar
GTAW (TIG) · GMAW (MIG) · SMAW (Stick) · Laser Beam Welding · Electron Beam Welding. Use matching filler (ERNiCrMo-3 for 625, ERNiFeCr-2 for 718), low heat input and interpass control to avoid hot cracking.
How Inconel Bar Stock Is Made
Melting (VIM/VAR or EAF+AOD) → ingot/billet casting → homogenisation → hot rolling or open-die forging → solution annealing → pickling/descaling → cold drawing or peeling and turning → centreless grinding/polishing → straightening → NDT, PMI and mechanical testing → marking, cutting and packing.
Inconel Round Bar Price List
Pricing for Inconel bar stock moves with LME nickel, grade, diameter, condition and quantity. Indicative levels:
| Product Description | Price (USD) | Price (AED) |
|---|---|---|
| Inconel 600 Round Bar, 1/4″ | $49.67 | AED 182.44 |
| Inconel 600 Round Bar, 1/2″ | $69.76 | AED 256.23 |
| Inconel 600 Round Bar, 3/4″ | $144.03 | AED 529.03 |
| Inconel 600 Round Bar, 1″ | $645.54 | AED 2,371.08 |
| Inconel 601 Round Bar, 32 mm | $611.99 | AED 2,247.84 |
| Inconel 718 Round Bar (forged) | $30.69 / kg | AED 112.72 / kg |
| Inconel 625 Round Bar, hot rolled | $20 – $30 / kg | AED 73 – 110 / kg |
| Inconel 600 Forged Round Bar (UNS N06600) | $25 – $35 / kg | AED 92 – 129 / kg |
| Inconel Round Bar, annealed & pickled | $1,200 – $9,600 / ton | AED 4,406 – 35,251 / ton |
Prices are indicative and ex-Mumbai. For a firm, dated quotation against your grade, size and quantity, email sales@jadealloys.com or submit an RFQ
To See the difference between Inconel and Monel Round Bar Read: Monel 400 vs Monel K500 Round Bars
Applications of Inconel Round Bar
- Aerospace: Jet engine shafts, turbine blades, exhaust systems, aerospace fasteners
- Nuclear power: Reactor core internals, control rod mechanisms, steam generator tubing supports
- Oil & gas / offshore: Downhole tooling, wellhead components, sour service (NACE MR0175) parts
- Chemical processing: Reactor vessels, acid pickling equipment, heat-exchanger internals
- Power generation: Gas turbine hot-section hardware, superheater supports
- Heat treatment plants: Furnace muffles, retorts, radiant tubes, fixtures
- Fasteners: Bar stock machined into stud bolts, hex bolts and nuts for high-temperature bolting
- Sealing: Bar-machined rings for Inconel RTJ gaskets
Frequently Asked Questions
1. What is an Inconel round bar?
2. What standards do Inconel round bars comply with?
3. What sizes of Inconel round bar are available?
4. What is the price of Inconel round bar in India?
5. How do I calculate the weight of an Inconel round bar?
6. What is the difference between Inconel 600 and Inconel 625 round bar?
7. Is Inconel round bar magnetic?
8. Can Inconel round bar be welded and machined?
9. What certificates are supplied with Inconel bar stock?
10. Who are the leading Inconel round bar suppliers in India?
Related Products
- Inconel tube plugs
- Inconel header plugs
- Inconel RTJ gaskets
- Inconel sheets & plates
- Inconel Pipes & Tubes
Explore Our Other Round Bar Materials: Super Duplex | Monel | Inconel | Hastelloy | Stainless Steel | Carbon Steel | Alloy Steel | Nickel Alloy | Copper Nickel | Nimonic | Titanium | Zirconium | Waspaloy | Nitronic
Countries We Export Inconel Round Bars To
Jade Alloys exports Inconel round bars to more than 50 countries through our network of sales representatives.
Get a Quote for Inconel Round Bars
Looking for a trusted Inconel round bar manufacturer, supplier and exporter? Jade Alloys supplies premium Inconel round bars, rods, hex bars, square bars, flat bars, bright bars and precision ground bars in all grades and finishes with complete material test certificates, export documentation and reliable worldwide delivery.
