Author: admin

High tensile bolts are high strength bolts used to protect parts that are subjected to high stress, vibration and harsh operating environments. These bolts are available in various property classes (8.8, 10.9 and 12.9) each with different tensile strength, yield strength and hardness levels to meet specific fastening requirements. They have mechanical properties that vary...

This nut bolt weight chart is provided in different metric sizes ranging from M6 to M64. The weight of each M12 × 60 mm carbon steel bolt and the corresponding nut is around 82g, 100 sets of bolts weigh about 8.2kg, and 1kg of bolts contain around 12 sets. Refer to this nut bolt weight...

At Jade Alloys, we provide carbon steel DIN 934 and stainless steel DIN 934 hex nuts, and here is the DIN 934 nut weights table that shows the weight of each size in grams per nut, kilograms per hundred, and kilograms per thousand for sizes M1 to M100. The weight of an M12 nut in...

The weight of every size from M1.6 to M76 is provided in this DIN 125 Weight Chart for DIN 125 Flat Washers that are supplied by Jade Alloys. The other things that comes under this article is DIN 125 A M12 washer weighs 6.27 g, so 1,000 pieces weigh 6.27 kg. The M16 washer weighs...

Look up the weight of a stud bolt online and you will usually find one unlabelled number. The trouble is that a stud bolt weight chart can mean two different things: the weight of the bare, threadedstud bolt alone, or the weight of that same stud fully assembled with two heavy hex nuts, the way it...

The specific weight of the fastener is an important part of the material estimation, logistics planning and preparing the bill of quantities (BOQ). Procurement departments and engineers can use a trustworthy washer weight chart when calculating loads or structural assembly specifications; this will enable them to accurately convert dimensions to loads. The weight of a...

To determine the exact loads for materials, logistics requirements and bill-of-quantities (BOQ) figures for structural framing, mechanical hanging or pipe support structures, one needs an accurate and verifiable threaded rod weight chart. When you must estimate shipping freight per metre, you need to know how the threaded rod weights are calculated, either when you want...

Jade Alloys publishes this ISO 4014 dimensions chart to sit alongside our existing ISO 4014 standards reference, giving buyers, draughtsmen, and quality teams the complete worked size chart in one place rather than a bare table of numbers. ISO 4014 covers hexagon head bolts with a shank, meaning the bolt is only partially threaded, with...

Jade Alloys  supplies duplex and super duplex stainless steel products for demanding industrial applications, including fasteners, round bars, sheets, plates, pipes, tubes, gaskets and plugs. The company supports grade selection based on application requirements, applicable standards and service conditions.  The distinction between duplex and super duplex stainless steel is not just based on chromium content....

Jade Alloys is asked daily to help specify the right fastener material, since whether a bolt, nut or stud lasts its full service life or fails long before its rated load is reached comes down almost entirely to that one choice. While size and thread pitch are important, the material of which a fastener is...